|
Post by neversawbefore on Dec 5, 2021 18:52:04 GMT -5
Hello all, I've been lurking here and I've gotten a ton of helpful info. Been able to figure out what parts I need and been able to track them down.
The question is: what do I put in these tanks? There are two! What fuel mix? What kind of oil?
You can tell I'm totally new to all this. This is my first small engine repair of any kind!
The saw is a UT 10617-A Serial Number: 7F2582037
Thanks for any and all help.
|
|
|
Post by blythkd on Dec 5, 2021 19:12:23 GMT -5
40:1 fuel mix in the front tank. Mix ratio is not critical but 40:1 is about the most common nowadays. Most quality fuel mix oils are at least semi-synthetic now which is good but if you're willing to spend the money, full synthetic is very good stuff.
Bar and chain oil in the rear tank and you're all set.
|
|
|
Post by neversawbefore on Dec 7, 2021 15:29:27 GMT -5
Thank you very much! I'll be sure to
|
|