|
Post by jbartlett27513 on Dec 1, 2021 22:09:02 GMT -5
I have a 540 with a bad coil. No Spark, I replaced Spark plug wire as original was flakey but still no spark. I looked online but cannot find a Test Procedure for this type coil with the extra ground wire coming out of it. I want to know the exact procedure to test Primary and Secondary windings and isolation between them. Has anyone ever repaired one of these coils? Is there a link to the Service Manual for the 540 or 8800 saws? Thanks in Advance Jim B.
|
|
|
Post by undee70ss on Dec 2, 2021 1:50:11 GMT -5
|
|