|
Post by Clasec on Sept 27, 2021 22:44:25 GMT -5
|
|
|
Post by dpress on Sept 28, 2021 5:23:03 GMT -5
What a cracking pair of saws. I would be interested to know what Homelite used to block the redundant hole in the airbox for your saw which only has an automatic oiler. I have used a rubber bung and some mastic, but when I got it the hole was wide open and sucking in sawdust!
Steve
|
|
|
Post by Clasec on Sept 28, 2021 22:11:03 GMT -5
What a cracking pair of saws. I would be interested to know what Homelite used to block the redundant hole in the airbox for your saw which only has an automatic oiler. I have used a rubber bung and some mastic, but when I got it the hole was wide open and sucking in sawdust! Steve Mine has a plastic plug sandwiched between the air box and crankcase. VI SuperMini SL oiler blockoff cap by Clasec, on Flickr
|
|
|
Post by dpress on Sept 29, 2021 13:40:16 GMT -5
Thank you for that photo. I have sealed the hole with a bung from the outside as well, albeit not a plastic one - I only had some small rubber plugs about the place so used one of those. I think they are such a good little saw, and with an oiling system that really works. Unlike my 330 which seems to stop oiling every other time I use it.....
Steve
|
|