|
Post by george2 on Sept 20, 2021 6:51:14 GMT -5
Hi, I'm wanting to get a carburetor kit but am unsure what model it is. The brand is Walbro and it's from an ST-155.
|
|
|
Post by bobby167 on Sept 20, 2021 9:25:45 GMT -5
Check for numbers on side of carb. If Walbro it should have something like wt71. This unit lists a Walbro & Zama carb.
|
|
|
Post by Jarhead ☠ on Sept 20, 2021 9:30:55 GMT -5
Walbro=K20-WAT Because the kit will have several pcs you'll need to retain the diaphragms to match them.
|
|
|
Post by george2 on Sept 21, 2021 6:33:26 GMT -5
Check for numbers on side of carb. If Walbro it should have something like wt71. This unit lists a Walbro & Zama carb. Never noticed it before but a quick wipe revealed is a WT-220.
|
|
|
Post by george2 on Sept 21, 2021 6:34:31 GMT -5
Walbro=K20-WAT Because the kit will have several pcs you'll need to retain the diaphragms to match them. Hi, finally found the model number. It's a WT-220. Is it the same kit?
|
|
|
Post by Jarhead ☠ on Sept 21, 2021 8:41:08 GMT -5
Walbro=K20-WAT Because the kit will have several pcs you'll need to retain the diaphragms to match them. Hi, finally found the model number. It's a WT-220. Is it the same kit? K10-WAT
|
|
|
Post by george2 on Sept 21, 2021 12:23:51 GMT -5
Hi, finally found the model number. It's a WT-220. Is it the same kit? K10-WAT Thanks I'll get that ordered. I notice it doesn't seem to come with the rubber gasket from the vertical picture. Is that normally purchased separately?
|
|
|
Post by Jarhead ☠ on Sept 21, 2021 13:22:56 GMT -5
Unfortunately the gasket isn't included unlike the Tillotson kits.
|
|