|
Post by footstep on Aug 23, 2021 22:37:17 GMT -5
Hey all, dad was cleaning the shop the other day and he found some chain, their for his 360 3 of the 5 chains were oregon 72, the odd 2 now I've never seen, one was marked [H] on the cutter no stamp on the drive link but a 38 stamped on the tie strap the cutters are small, I haven't measured them yet but it's definitely a 3/8 chain with small cutters it's 81 count he said that's the chain that came on the saw with the 24" bar when he bought it, the other one is for the 20" bar that he got back then when the 24 was not needed, it has the same [H] stamp on the cutter and a = on the other side of the cutter same 38 stamp on the tie strap the opposite tie strap also has a depth gage to match the cutter? I've never seen this. Are these factory homelite chains? Or did homelite use something different for factory?
|
|
|
Post by undee70ss on Aug 24, 2021 0:21:38 GMT -5
With the “H” stamp is factory Homelite chain
|
|
|
Post by footstep on Aug 24, 2021 23:06:45 GMT -5
Thank you sir, I kindy appreciate it.
|
|