|
Post by keeanxl12 on Jul 17, 2021 17:24:32 GMT -5
The PO of my 360 was running a CJ8, they are supposed to run a DJ6J plug but I couldn't find one at my parts store. Instead I found and brought a DJ7J plug, will this make any significant differences? One heat range shouldn't matter should it?
Thanks in advance!
|
|
|
Post by blythkd on Jul 17, 2021 21:14:05 GMT -5
I'd run a CJ6. It's a washer seat plug like the CJ8 you took out. The DJ6J is a taper seat plug but we switched to the CJ6 years ago. The centers seem to stay in them better than the smaller taper seat plugs. 360's were always bad about blowing the porcelain loose on DJ6J's.
|
|
|
Post by keeanxl12 on Jul 17, 2021 21:49:25 GMT -5
I'd run a CJ6. It's a washer seat plug like the CJ8 you took out. The DJ6J is a taper seat plug but we switched to the CJ6 years ago. The centers seem to stay in them better than the smaller taper seat plugs. 360's were always bad about blowing the porcelain loose on DJ6J's. That is really good to know, I'll pick up a couple CJ6 Plugs tomorrow. The number is how hot the plug runs right? Thanks!
|
|
|
Post by blythkd on Jul 17, 2021 22:01:45 GMT -5
Yes, the 6 is the heat range.
|
|