|
Post by keknw8 on Jul 10, 2021 14:26:18 GMT -5
putting back together this 150 and i don't have a .0125"/0.317mm black plastic shim to set the core-to-rotor air gap.
i do have a biz card of 0.31mm thickness. would that work or is the card going to be too soft and the magnets will squish it a bit and not get the correct air gap?
|
|
|
Post by tangobravo on Jul 10, 2021 14:47:19 GMT -5
I use a 1 gallon milk jug section to set mine. They come in around .015"
|
|
|
Post by markprice on Jul 10, 2021 15:17:05 GMT -5
I use a dollar bill, it is .0043 thick. Fold in half then fold 1/2 back on its self, 3 layers .0129. Always seem to have a dollar handy.
|
|
|
Post by keknw8 on Jul 10, 2021 22:44:55 GMT -5
I use a 1 gallon milk jug section to set mine. They come in around .015" great! thanks much for your reply & tip.
|
|
|
Post by keknw8 on Jul 10, 2021 22:52:07 GMT -5
I use a dollar bill, it is .0043 thick. Fold in half then fold 1/2 back on its self, 3 layers .0129. Always seem to have a dollar handy. many thanks for your help & tip too!
|
|