|
Post by maxerious on Jun 5, 2021 23:31:42 GMT -5
Hello my recoil starter slipped a bit so I got some new pawls figured I would replace the rope while I was at it I did some research but came up empty for this particular saw. I have a spool of #4 that I use for my other saws but they are anywhere from 26cc to mid 40cc and this 923 has compression for days is #4 still acceptable or should I use something else thanks
|
|
|
Post by tangobravo on Jun 6, 2021 7:10:13 GMT -5
My SXL-925 IPL calls for #5 (5/32") rope. Smaller diameter may bind when pulled in the pully groove.
|
|