|
Post by mlmt89 on May 24, 2021 10:42:10 GMT -5
New here to this forum and I’m hoping someone has an answer, I know that the saw uses a 16” bar and a 3/8 .50 chain S59 , I’m hoping to find a 12” or 14” bar and chain to fit the Super EZ Automatic! Anyone know if they exist? Thanks
|
|
|
Post by blythkd on May 24, 2021 11:12:31 GMT -5
I used to see a 14" here and there but they were fairly rare decades ago. Probably have to watch for a while to see one. Never seen a 12" with G3 mount.
|
|
|
Post by xl130 on May 24, 2021 17:29:34 GMT -5
I think the small mount Husqvarna bars will mount up to the Super EZ. K095 Oregon mount. May have to watch out for .325 pitch though.....
|
|
|
Post by stillsawing on May 24, 2021 22:29:58 GMT -5
I bought a Super EZ Auto in the early 80s and set it up for limbing. The 16" bar was traded off for two 12" GW (12503) bars. The dealer mentioned that they had only two left, and I took both, knowing that it was a obsolete item. If you find one, I don't recommend a standard 3/8-.50 chain, too grabby. Low pro lessens that bad habit. I still have the Super EZ, and recently put a new PT16503 on it, saved the two 12" bars for a XL-1 and another Super EZ.
|
|