|
Post by BrianB on May 21, 2021 11:35:15 GMT -5
I also have this Homelite saw. It's been sitting unused for a few years and won't start. The problem is most likely with the carburetor. I am the original owner and this saw has never had any carb work done previously, so what's there is factory original. I have been unable to find a replacement carb so it looks like I will probably have to try to find a carb rebuild kit. Any suggestions? Thanks - Brian
|
|
|
Post by blythkd on May 21, 2021 15:20:02 GMT -5
Diaphragm and gasket kit is Walbro K10-HDC or Homelite 98631. If it's never had anything done you'll likely need all new fuel line and filter too.
Have you checked for spark? If it has an electronic ignition, good chance you have an ignition issue as well. Most of them have quit by now.
|
|
okie
Saw Builder
Posts: 199
|
Post by okie on May 22, 2021 14:23:55 GMT -5
I also have this Homelite saw. It's been sitting unused for a few years and won't start. The problem is most likely with the carburetor. I am the original owner and this saw has never had any carb work done previously, so what's there is factory original. I have been unable to find a replacement carb so it looks like I will probably have to try to find a carb rebuild kit. Any suggestions? Thanks - Brian Do you see any ser or ut #'s on the saw? Can you post up some Pic's of your saw? Do you see any small numbers/name of your carb? Walbro HXX or something?
|
|