|
Post by dancbx on May 15, 2021 21:01:11 GMT -5
Does anyone know if a clutch cover from a DM50 cutoff saw will fit the 550. I realize there is not a bar adjuster on the DM but is that easily added? Does it use the same muffler as well? Thanks Dan
|
|
|
Post by harwester on May 16, 2021 1:31:20 GMT -5
|
|
|
Post by Clasec on May 16, 2021 9:04:51 GMT -5
Does anyone know if a clutch cover from a DM50 cutoff saw will fit the 550. I realize there is not a bar adjuster on the DM but is that easily added? Does it use the same muffler as well? Thanks Dan Looks to me that the cover has about half of the adjusting screw boss machined off. Also the muffler exits down and forward instead off out the side.
|
|
|
Post by dancbx on May 16, 2021 21:33:58 GMT -5
Does anyone know if a clutch cover from a DM50 cutoff saw will fit the 550. I realize there is not a bar adjuster on the DM but is that easily added? Does it use the same muffler as well? Thanks Dan Looks to me that the cover has about half of the adjusting screw boss machined off. Also the muffler exits down and forward instead off out the side. Thanks I was hoping to use a dm cover on my 550, with a little machining.
|
|