Post by onlyhomelites on May 17, 2021 7:59:01 GMT -5
The 35SL has the came cylinder and crankcase as a late 360; that gasket is likely made of unobtanium, so I'd plan on cutting your own or substituting the sealant in its place. I'm afraid in all the parts I've gone through, I've never even come across that one!
One guy you could try is scotts88 on Ebay...he sells a lot of Canadian parts.
The 35SL uses the same piston and rod as a 360 as well. So by using a base gasket on the 35 evidently it would have a bit lower compression than a 360 that did not utilize a gasket. If it were mine, since it uses all the same parts as a 360, I would just silicone it.
Am I missing something here?
XL-12",Super 2-14",Super EZ-16",330-16",Super XL-16",360-20",XL500,450-20",Super XL 925-24",Super 1050-36",750-36",ST260 trimmer,AP125 pump,AP520 pump,HTC12 tiller,T16 tractor w/48" mower, tiller and front blade