|
Post by justcollecting on Apr 21, 2021 15:53:31 GMT -5
Ok so I have mastered the duckbills that go in the side of the cap, but this one has me stumped. The duckbill doesn't seem to fit down in the tube but the tube also doesn't seem to come out. How do I replace the duckbill in this style cap? It is on a XL-12. Thanks!
|
|
|
Post by undee70ss on Apr 21, 2021 16:06:09 GMT -5
That cap originally had a disk style duckbill.
|
|
|
Post by justcollecting on Apr 21, 2021 16:23:37 GMT -5
That cap originally had a disk style duckbill. Are those still available or replaceable? Should I just switch out to the caps with the duckbill in the side?
|
|
|
Post by undee70ss on Apr 21, 2021 18:19:25 GMT -5
That cap originally had a disk style duckbill. Are those still available or replaceable? Should I just switch out to the caps with the duckbill in the side? Replaceable yes, available not easily.
|
|
|
Post by undee70ss on Apr 21, 2021 18:25:22 GMT -5
The 2 top caps in the pic is what they originally looked like.
|
|
|
Post by undee70ss on Apr 21, 2021 18:27:28 GMT -5
I don't believe you can use the newer style caps as the threads are different.
|
|
|
duckbill
Apr 21, 2021 20:42:18 GMT -5
via mobile
Post by justcollecting on Apr 21, 2021 20:42:18 GMT -5
I don't believe you can use the newer style caps as the threads are different. Forgive me if I am not following but mine is the 3rd one down from the top right?
|
|
|
Post by undee70ss on Apr 21, 2021 22:02:07 GMT -5
I don't believe you can use the newer style caps as the threads are different. Forgive me if I am not following but mine is the 3rd one down from the top right? No. The black covering is the duckbill. Its actually flat.
|
|