|
|
Post by chainsawfever on Apr 15, 2021 20:20:29 GMT -5
Does anyone know of a good ignition chip write up for a super xl? I just went through one with points and everything is good , but I can feel a stumble in the ignition while it’s running.
|
|
|
|
Post by jklw77 on Apr 16, 2021 16:14:43 GMT -5
Had one was giving me fits , ran ok then would barley run, stumble , after it ran a while. Fired it up in shed low light conditions and I found my problem . Plug wire grounding to frame, at times shorting out. New plug wire , runs like a champ. Check for bad connections .
|
|
|
|
Post by chainsawfever on Apr 16, 2021 21:36:06 GMT -5
I’ve got something going on with this sxl. It has new seals in it, but the carb tuning is all over the place. I’m gonna pressure test it again and go from there.
|
|
okie
Saw Builder
Posts: 199
|
Post by okie on Apr 19, 2021 13:42:23 GMT -5
What type carb does that one have?
|
|
