|
Post by redrider on Apr 4, 2021 21:32:48 GMT -5
Does anyone know of a 3/8 sprocket that will fit a cs50 or cs40? nothing wrong with my .325, but its the on;y .325 saw i have and id like them all to be 3/8. i know some sprockets will swap on various saws, but none of my 3/8 sprockets on other saws will work. its either a crankshaft issue or drum size.
any ideas or input would help
thanks
Jay
|
|
|
Post by onlyhomelites on Apr 5, 2021 23:20:49 GMT -5
|
|
|
Post by redrider on Apr 10, 2021 9:04:38 GMT -5
Thank you. I get a little forgetful sometimes and miss stuff. Really appreciate it
|
|
|
Post by redrider on May 10, 2021 18:18:48 GMT -5
Thank you. I get a little forgetful sometimes and miss stuff. Really appreciate it Just wanted to follow up on this. I bought an OEM alone and drum, part # A02990, and this does not work for the CS50. It’s a little bit too large, needs a different needle bearing and I’m not sure the clutch would hold that well for the extra distance it has to travel to engage. I guess this saw is stuck with the factor .325 drum. Oh well. Gotta try stuff to make sure it works.
|
|