|
Post by ktmklp on Mar 30, 2021 12:39:50 GMT -5
Hello,
I have a homelite XL saw that I'm cleaning up. It sat for several years and was covered in grime so when wiping it down I used a little cleaner and accidentally wiped the serial number clean off, so now I'm not sure what exactly this thing is.
I attached some photos that should help, just looking to get close so I can figure out what wear items to order. It has a zama C1Q-H17B carb which I ordered a rebuild kit for, also has a bubble primer.
Things I need: Spark plug (currently has champion DJ7Y) Sprocket (Current one a very worn 6 tooth, only marking on it is the number 37) Chain
Any help would be appreciated.
Attachments:
|
|
|
Post by ktmklp on Mar 30, 2021 12:40:47 GMT -5
. Attachments:
|
|
|
Post by ktmklp on Mar 30, 2021 12:41:09 GMT -5
. Attachments:
|
|
|
Post by undee70ss on Mar 30, 2021 14:05:08 GMT -5
Hello,
I have a homelite XL saw that I'm cleaning up. It sat for several years and was covered in grime so when wiping it down I used a little cleaner and accidentally wiped the serial number clean off, so now I'm not sure what exactly this thing is.
I attached some photos that should help, just looking to get close so I can figure out what wear items to order. It has a zama C1Q-H17B carb which I ordered a rebuild kit for, also has a bubble primer.
Things I need: Spark plug (currently has champion DJ7Y) Sprocket (Current one a very worn 6 tooth, only marking on it is the number 37) Chain
Any help would be appreciated. The 37 marked on the clutch drum is the chain pitch which is 3/8 low pro. The 37 marked on the clutch drum is the chain pitch which is 3/8 low pro.
|
|
|
Post by undee70ss on Mar 30, 2021 14:10:12 GMT -5
|
|
|
Post by undee70ss on Mar 30, 2021 14:15:16 GMT -5
|
|