|
Post by Jarhead ☠on Feb 8, 2021 11:50:14 GMT -5
Wow LRB is a wee bit on the high side 😳
|
|
|
Post by edju1958 on Feb 8, 2021 11:53:38 GMT -5
Normally that coil is $49.95.Have you tried contacting them by phone or email?If this is for your C9 you must determine if the saw has Wico or Phelon system.This coil from LRB is for a Wico system.Proline sells a coil for the Phelon system.
|
|
|
Post by Jarhead ☠on Feb 8, 2021 15:30:22 GMT -5
No I was just pointing out the ridiculous price.
|
|
|
Post by undee70ss on Feb 8, 2021 18:57:38 GMT -5
No I was just pointing out the ridiculous price. EBay sellers do that when they are out of stock. Then lower the price when their stock is replenished. They do this to save on relisting fees.
|
|
|
Post by lesorubcheek on Feb 8, 2021 21:41:08 GMT -5
... If this is for your C9 you must determine if the saw has Wico or Phelon system.This coil from LRB is for a Wico system.Proline sells a coil for the Phelon system. I always thought all the Cs used the same coil. Honestly never paid too much attention though and haven't torn into a C in a few years. Would they be interchangeable, or would they need a matching flywheel? Dan
|
|
|
Post by edju1958 on Feb 8, 2021 23:50:27 GMT -5
Come to think of it Dan,they all use a Phelon condenser,so they must all be Phelon systems on the C series.The Wico coil that LRB carries is for the SXL/XL-12 replacement & Proline carries the Phelon counterpart.FWIW I bought 3 or 4 of the Wico replacement coils for $49.95 & they're working out well,beats the heck out of paying over $100 for another blue coil of death.
|
|
|
Post by xl130 on Feb 9, 2021 5:06:14 GMT -5
On a positive note they offer PayPal financing and the shipping price is great......
|
|
|
Post by sweepleader on Feb 9, 2021 20:23:59 GMT -5
It's just the coil/flywheel combination that needs to be from the same manufacturer, the condenser would work with either.
|
|