|
|
Post by jasonrkba on Jan 31, 2021 18:30:08 GMT -5
I disassembled my 102 and found that it has a really thick rubber oil line that wraps around the engine. Id say bad idea but its been there for about 50 years. What material is a good idea for replacing the line?  |
|
|
|
Post by jasonrkba on Jan 31, 2021 18:51:50 GMT -5
Im guessing it was an oil line. Looking at the ipl i don't know. I took it apart in limited time and wasntt as carful as normal.
|
|
|
|
Post by fossil on Jan 31, 2021 19:17:54 GMT -5
Im guessing it was an oil line. Looking at the ipl i don't know. I took it apart in limited time and wasntt as carful as normal. That's just rubber welting to keep crud out of the gap between the crankcase and the fuel tank. Put it back when all is clean. |
|
|
|
Post by jasonrkba on Jan 31, 2021 19:21:58 GMT -5
Awesome guy's. Thank you.
|
|
