|
Post by Jarhead ☠ on Jan 17, 2021 16:35:52 GMT -5
So I put my saw together but noticed that the impulse isn't working. I tried spraying a bit of WD-40 down the line and it just shot back at me so I tried using my mityvac to apply some air and still nothing. Any ideas?
|
|
|
Post by onlyhomelites on Jan 17, 2021 22:20:51 GMT -5
It's easy to get the hose pinched as the throttle handle goes down, that could be what happened. I'd pull your spark plug and try blowing compressed air back into the cylinder. If it takes any effort at all, the hose is likely kinked.
|
|
|
Post by Jarhead ☠ on Jan 17, 2021 23:24:23 GMT -5
Thanks Leon I'll give it a try.
|
|