|
|
Post by pumpkinracing on Jan 14, 2021 18:24:10 GMT -5
So since I was working on the 7-29 I decided to work on a group . Now I have 2 7-29’s apart and 4 5-30 ‘s apart . Restoring all six in a group . Today I was working on exhaust . Screens are non existent. Payed 6.00 each for 3 outside screens .have no inner screens not paying 21.00 for one so I made 10 . Out of stainless steel. Tomorrow I’ll work on outer screen. imgur.com/a/S1v3lMx |
|
|
|
Post by onlyhomelites on Jan 14, 2021 22:08:59 GMT -5
Nice work! I'd go crazy having that many of that series apart at one time...quite a few parts to each one!
|
|
|
|
Post by pumpkinracing on Jan 15, 2021 18:55:43 GMT -5
I figured since I was working on the 7-29 the 5-30 use most of the same parts . It was better .
|
|
|
|
Post by sparky on Jan 16, 2021 17:26:32 GMT -5
Somewhere in the garage I have a chunk of screen like you used. I thought it would work on my Zip. Now if I could figure out where I poked it....lol!
|
|
|
|
Post by pumpkinracing on Jan 16, 2021 21:30:18 GMT -5
I suppose having this many apart is overwhelming. But i divided my work areas . Had originally started with one 5-30 ,20 mcs,26lcs. But had to many different things going on. So when I got 7-29’s i moved things around one side has station for 20 mcs and 26lcs and another side has one for 5-30’s and 7-29’s and set up another bench for the 1130’s and 1050’s . Yesterday i moved out my old gang box and setup a dedicated part wash and blasting station . Got down snap on parts washer and found a larger sand blaster in garbage only thing wrong was it needed
legs and a gasket under plexi .
|
|
|
|
Post by pumpkinracing on Jan 17, 2021 17:43:03 GMT -5
|
|
|
|
Post by pumpkinracing on Feb 28, 2021 13:06:38 GMT -5
Spent a couple of days rebuilding oil pumps ,and finally put them on the tanks. This week I’ll start reassemble the 7-29 and then start on the 5-30 will post some pictures of progress
|
|
|
|
Post by pumpkinracing on Mar 16, 2021 17:44:48 GMT -5
|
|
|
|
Post by markprice on Mar 16, 2021 18:50:38 GMT -5
Damn that looks GREAT!!
|
|
|
|
Post by timinnb on Mar 16, 2021 19:04:51 GMT -5
|
|
|
|
Post by sparky on Mar 18, 2021 16:20:01 GMT -5
That turned out really nice
|
|
|
|
Post by tangobravo on Mar 18, 2021 16:38:31 GMT -5
Can't wait to see the box/packaging restoration to go with it(!)  Truly a remarkable job with that work! |
|
