|
|
Post by blythkd on Dec 15, 2020 12:24:11 GMT -5
With some cold and wet weather recently, I finally started unloading some crates of parts and going through the bin boxes, mostly dumping mouse goodies out and counting/organizing a bit. It needs more time and organization, mainly updating inventory. It's been fun seeing all the stuff that I didn't realize I had. I see many parts that I know guys would love to have, especially parts for some of the old vintage stuff. I know you can hardly look at the pictures and see anything you want or need. Just realize I have some parts and if you need something you can't find, give me a shout and I'll check inventory. If it says I have one, I'll try to locate it. These are just a few pix of what we've been going through lately, there are many more not pictured either already on the shelf or just in smaller piles that didn't rate a picture!  IMG_2179 by Brent Houk, on Flickr  IMG_2182 by Brent Houk, on Flickr  IMG_2183 by Brent Houk, on Flickr  IMG_2184 by Brent Houk, on Flickr |
|
|
|
Post by rowdy235 on Dec 15, 2020 22:29:20 GMT -5
You've got your work cut out for you for sure, nice looking lot!
|
|
|
|
Post by blythkd on Dec 16, 2020 9:20:30 GMT -5
Yeah tell me about it, that's why it's all been sitting for years. There are multiple lots, a couple of pretty decent dealer stock buyouts and a few smaller lots. We got 2 big crates emptied and gone through but there are still several boxes of stuff left to sort out. It's fun but time consuming.
|
|
|
|
Post by edju1958 on Dec 16, 2020 10:49:21 GMT -5
Don't ya just love it? You're most likely finding stuff that you forgot you had when you bought the lots in the first place,Lol.I know I've only got 3 large totes full of parts in small boxes & another large box with more parts & I know how tough it is to keep track of what I have.It's gotten to the point that I should do an inventory & put it in a folder in my computer,but then I'd probably forget to delete an item as I use it,Lol.
|
|
|
|
Post by ansms on Jan 9, 2021 11:59:57 GMT -5
Happy New Year!
Do you happen to have any of the following?
** SXL 925 flywheel/rotor (96801) for 1-piece ignition
** 925 coil / generator (67163) for 3-piece ignition
** 3/8 rim sprocket w/ drum/hub for 925, C72, or 1050 saws
** 944/955 clutch/drive case cover (67156-5)
Thank you,
Don
|
|
|
|
Post by sparky on Jan 9, 2021 18:46:10 GMT -5
Any Zip or 600d parts?
|
|
|
|
Post by blythkd on Jan 9, 2021 22:36:58 GMT -5
I'm really not sure how many parts for the older saws I have without part numbers or at least descriptions to look up part numbers. I know there are some older parts here and there just not sure what all they fit.
|
|
|
|
Post by sparky on Jan 10, 2021 20:35:12 GMT -5
Ok,I have some numbers from my IPL.
Handle bar cushions #55685
Air filter 57337-A
Log spike 55632-1
Sprocket/drum 8 tooth .404 A-57347 or 7 tooth .404 A-57344
Needle bearing for drum #55664
If I understand the response to my question about saw chain I can run 3/8"on a .404 drum.I was given an Oregon part number that I haven't chased down yet.
|
|
|
|
Post by Jarhead ☠ on Jan 16, 2021 8:52:07 GMT -5
If you happen to come across a sprocket shaft # 59277-A I'd be interested in buying it.  |
|
|
|
Post by blythkd on Jan 16, 2021 14:33:26 GMT -5
I've been way ahead of ya, brother. I looked for it already! Many times when I see someone on the forum is hard up for a part, I go look for it.
By now I'm sure you guessed I didn't find one.
Thanks for checking.
|
|
|
|
Post by johnly on Jan 21, 2021 11:20:12 GMT -5
I could use a pair of muffler studs for my XP1100, Part #59982
|
|
|
|
Post by ansms on Jan 22, 2021 8:00:18 GMT -5
I received the parts yesterday. Thank you very much Brent!
Everything looks great. You made things a lot easier for me. Now I just need to finish the restoration on my son’s tractor today and I might be able to finish one or two saws this weekend 👍
Have a great weekend!
|
|
|
|
Post by blythkd on Jan 30, 2021 19:52:16 GMT -5
|
|
|
|
Post by Clasec on Jan 30, 2021 20:37:05 GMT -5
I know 57883 fits a 770G. 56906 fits a 700G and a 707G. |
|
|
|
Post by blythkd on Jan 30, 2021 20:59:23 GMT -5
Thanks, I've never worked on a saw with a starter clutch like that. Don't think there was much of anything like that in our area. Some old C series saws were about the oldest stuff around here.
|
|
|
|
Post by canadian270 on Apr 14, 2021 14:06:32 GMT -5
Thanks, I've never worked on a saw with a starter clutch like that. Don't think there was much of anything like that in our area. Some old C series saws were about the oldest stuff around here. |
|
|
|
Post by canadian270 on Apr 14, 2021 14:10:47 GMT -5
Hay bro im looking for parts for a c51 side cover whitch the starter case bolts on also a spare cylindar and piston and a coil for my zip.can you see what you can do?please!!also pm you.
|
|
|
|
Post by Jarhead ☠ on Apr 14, 2021 19:49:39 GMT -5
Hey canadian270 it would be cheaper to find a parts zip saw, there are several on Facebook marketplace in my area now.
|
|
|
|
Post by 99tahoe on Apr 22, 2021 18:35:15 GMT -5
looking for some xl925 parts you have anything .... ignition system mainly
|
|
|
|
Post by blythkd on Apr 27, 2021 19:07:57 GMT -5
I have some 925 ignition parts for the CD ignition. Just let me know what you're looking for and I'll take a look.
|
|
