|
|
Post by Jarhead ☠ on Nov 12, 2020 17:51:12 GMT -5
So I just picked up this complete saw today, she looks a bit rough but she has the missing bar and chain, shoe, adjuster and other hardware. I can clean up the parts and put them on my nice saw and repair this one or have it as a part saw.  |
|
|
|
Post by Jarhead ☠ on Nov 13, 2020 12:05:24 GMT -5
So I went to work removing the muffler and sparkplug, added oil/gas mix and attempted to move the piston and it moved freely AND has spark! P&C are in great shape. It has a few broken and repaired pcs but overall it's in good shape.  |
|
|
|
Post by sawnami on Nov 14, 2020 9:12:00 GMT -5
You did good. If the piston moves and it has spark, you're probably close to having a runner.
|
|
|
|
Post by Jarhead ☠ on Nov 14, 2020 9:25:26 GMT -5
I'm going to need a recoil pulley because this one is damaged. I took apart the ratchet assembly to clean it up so the recoil would move smoother.   |
|
|
|
Post by ronaldt on Nov 14, 2020 10:09:48 GMT -5
Are you planning to restore/paint it?
|
|
|
|
Post by Jarhead ☠ on Nov 14, 2020 19:25:04 GMT -5
No I'm not, I have a really nice one already.
The 1st picture is of the new one and the 2nd is my really nice one.
|
|
|
|
Post by ronaldt on Nov 14, 2020 19:48:33 GMT -5
Good plan! I really appreciate the nice originals
|
|
|
|
Post by markprice on Nov 14, 2020 20:22:21 GMT -5
If you can not find a 20 MCS Pulley you can use a ratchet and pulley from a 26LCS or a 5-30 they will both fit on the crank but you need to keep the pulley and ratchet as a set as the 4 screws for the pulleys are drilled differently on those models.
|
|
