tfb3
Dumpster Diver
Posts: 29
|
Post by tfb3 on Oct 22, 2020 18:27:21 GMT -5
I have several 150 Autos my father has purchased over the years and has got me working on getting them running again. When i look at diagrams for the 150 Auto i still have not found part numbers that match the saw. One has a ser # of 50802133 and the other has a lot number of c6324 and ser # 40047213 any assistance would be appreciated to locate the correct parts.
|
|
|
Post by 5terrysupersaws on Oct 23, 2020 17:01:51 GMT -5
Dates of Manufacture :
1) 40047213 - Friday, January 4th, 1974
2) 50802133 - Friday, March 21st, 1975
3) C6324 - Friday, November 19th, 1976
|
|
tfb3
Dumpster Diver
Posts: 29
|
Post by tfb3 on Oct 23, 2020 20:56:21 GMT -5
Thank you for that info that helps and did not realize they where that old! Any way to match these with a UT or other Auto 150 parts diagram?
|
|
tfb3
Dumpster Diver
Posts: 29
|
Post by tfb3 on Oct 25, 2020 10:44:52 GMT -5
Does anyone know the size of the shaft for the flywheel, thinking about getting a left hand nut to assist with flywheel removal and keep in toolbox.
|
|
|
Post by 5terrysupersaws on Oct 25, 2020 15:40:50 GMT -5
|
|
tfb3
Dumpster Diver
Posts: 29
|
Post by tfb3 on Oct 28, 2020 6:52:52 GMT -5
was also looking for a template to make my own A-24544 tool since they seem to be very hard to find. Was also looking for the clutch tool as well, after looking at the service pdf doc.
|
|
|
Post by lesorubcheek on Oct 28, 2020 9:39:46 GMT -5
Does anyone know the size of the shaft for the flywheel, thinking about getting a left hand nut to assist with flywheel removal and keep in toolbox. This is a great idea. I've busted the end of a crank before with a puller. If I had a nut on it, likely wouldn't have happened. I want to think it was a 5/16, and with a fine thread, maybe 24 or maybe even 28. Forgive my poor memory, I do remember in the past looking for one locally and couldn't find a left hand nut the right size. Hopefully someone with one handy can give the exact size needed. I just haven't worked on a 150 in a while.
|
|
tfb3
Dumpster Diver
Posts: 29
|
Post by tfb3 on Oct 28, 2020 12:53:32 GMT -5
THANKS
|
|
tfb3
Dumpster Diver
Posts: 29
|
Post by tfb3 on Nov 11, 2020 7:48:44 GMT -5
|
|