|
|
Post by randybuxton on May 28, 2015 4:15:38 GMT -5
It doesn't work. I pull the trigger, push the lock button, jiggle the trigger so the button goes into the hole on the trigger but it won't hold it open. Does the hole in the trigger become oversized after 30 years making it act as it is?
|
|
|
|
Post by randybuxton on May 28, 2015 5:42:39 GMT -5
Just got home from work and took another look at the saw and thought of that little plastic bushing that's been sitting in the unknown parts bin. And whaddaya know,,, it goes in the hold in the handle cover where the trigger lock pin goes through. The lock pin is now stabilized when it is pushed to lock the trigger. Problem solved.
|
|
