|
Post by hotrodsuperxl on Oct 9, 2014 15:27:23 GMT -5
Hi Folks, tearing down my old 550 for a mild overhaul, new seals, and bearings, and while im at it i may replace a few other things.. pics soon to follow
|
|
|
Post by hotrodsuperxl on Oct 18, 2014 17:33:11 GMT -5
Tore the saw down and found flat spots on the main bearing rollers....apparently the bearing began to seize up and crank wore down the bearing rollers creating excessive clearance issues....luckily the crank looks like it will be ok
|
|
|
Post by onlyhomelites on Oct 19, 2014 22:08:40 GMT -5
Good damned thing you tore it down when you did...finding another crank would be difficult to say the least!
|
|
|
Post by hotrodsuperxl on Nov 27, 2014 18:19:22 GMT -5
Sorry for lack of pics but i did get saw put back together with new bearings, seals , oil and fuel lines and it ran great.
|
|