Homelite Little Red XL Oiler
Guest
|
Post by Homelite Little Red XL Oiler on Aug 21, 2011 13:20:49 GMT -5
Hello, I'm new to the Chainsaw world and I had a buddy give me his old saw and the saw runs find, only the Oiler does not oil the chain. The Model is UT10748C Homelite little red XL, Can anyone help? Thanks
|
|
|
|
Post by tribulation138 on Aug 21, 2011 20:13:35 GMT -5
first clean the bar and bar oil hole..
|
|
|
|
Post by MCS on Aug 23, 2011 7:48:17 GMT -5
The small XL series was made using two basic designs for the oiler. One has a diaphragm operated pump and the the other just pressurizes the oil tank with pulses from the crankcase with hopes that oil will flow out to the bar.
I'm quite sure you have the latter but you may need to pull the cover to see how the lines are routed.
Can you look inside the oil tank and see what is connected to the end of the line that comes in right below the filler cap opening?
|
|
